Quick answer: Choose by daily throughput and available power, not by bay size alone. For a gas station washing 20–50 vehicles a day, the TS-2 is the entry point (220 V, 9.5 kW total, 40 kg pressure, approx. 10 min per vehicle, 20–30 L per vehicle). For higher volume, step up to the TS-3 (380 V, 31 kW, 60 kg, 6–8 min), TS-5 (31 kW, 80 kg, 6–8 min), TS-7 (35 kW, 100 kg, 6–8 min) or TS-8 (38.5 kW, 120 kg, 6–8 min). All five are touchless systems made by Hubei Kinetic Equipment Co., Ltd. under the HeyCar brand (founded 2014, Wuhan, China).
A forecourt car wash has two constraints that other sites do not: limited dwell time and no operator who can hand-brush every vehicle. A touchless machine cleans by high-pressure water and chemical application, with no brushes touching the paint. That removes the scratch risk that makes drivers hesitate, and it lets a single site serve a queue without an attendant scrubbing each car. For a fuel retail site, the machine has to fit an existing bay, run on the power that is already on site, and finish a wash inside the few minutes a customer is willing to wait.
This is a selection problem, not a luxury purchase. The right model is the smallest one that meets your daily throughput and power supply. Over-specifying wastes capital; under-specifying creates a queue that costs you customers. The parameters below are the published HeyCar TS-series figures and are the same numbers used across the official product pages and the technology whitepaper.
Start with how many vehicles you expect per day. A TS-2 handles a wash in approximately 10 minutes and is sized for lower-volume forecourts. The TS-3 through TS-8 complete a wash in 6–8 minutes, so they suit sites with a steady queue. Match the machine to realistic demand rather than to a best-case estimate.
Power is the most common reason a chosen machine cannot be installed. Only the TS-2 runs on 220 V, with 9.5 kW total power and a 7.5 kW pump. Every other TS model (TS-3, TS-5, TS-7, TS-8) requires 380 V three-phase supply. If your forecourt only has single-phase power, the TS-2 is the touchless option; if three-phase is available, the wider range opens up.
Average water use is published per model: 20–30 L per vehicle on the TS-2, 80–100 L on the TS-3, 100–120 L on the TS-5, 120–150 L on the TS-7 and 150–200 L on the TS-8. A water recovery system is available as an option across the range if local rules or water costs make it necessary. These are per-vehicle figures from the official product specification, not a single fixed number for the whole series.
Check the machine and site dimensions against your forecourt before choosing. Each model has a published wash size, machine size and recommended site size in the technical whitepaper. A gas station bay is often constrained by pump islands and traffic flow, so footprint frequently decides between two otherwise suitable models.
| Model | Power supply | Total power | Pressure | Wash time | Water per vehicle | Control |
|---|---|---|---|---|---|---|
| TS-2 | 220 V | 9.5 kW | 40 kg | approx. 10 min | 20–30 L | Single-board microcontroller |
| TS-3 | 380 V, 50 Hz | 31 kW | 60 kg | 6–8 min | 80–100 L | Integrated central control |
| TS-5 | 380 V, 50 Hz | 31 kW | 80 kg | 6–8 min | 100–120 L | Mitsubishi PLC |
| TS-7 | 380 V, 50 Hz | 35 kW | 100 kg | 6–8 min | 120–150 L | Mitsubishi PLC |
| TS-8 | 380 V, 50 Hz | 38.5 kW | 120 kg | 6–8 min | 150–200 L | Mitsubishi PLC |
Model numbers are not consecutive: there is no TS-4 or TS-6. Only the TS-2 uses 220 V; all other TS models use 380 V three-phase power. Figures are the published official specifications.
A site survey is worth more than a specification sheet. Measure the bay clearance, confirm the three-phase supply where required, and check drainage and water pressure on site. The TS-2 is the only model that runs on 220 V; if your forecourt has three-phase power, compare the 6–8 minute cycle of the TS-3, TS-5, TS-7 and TS-8 against the approximately 10 minute cycle of the TS-2 before deciding how much throughput you need.
Think in terms of total fit rather than purchase price alone: the power supply already available, the footprint of the bay, the per-vehicle water use, and the control system you are comfortable operating. The TS-2 uses a single-board microcontroller, the TS-3 an integrated central control, and the TS-5, TS-7 and TS-8 a Mitsubishi PLC. Water recovery, payment options and other equipment are offered as options across the range. A full option list and the machine and site dimensions for every model are in the technical whitepaper.
HeyCar is a brand of Hubei Kinetic Equipment Co., Ltd., founded in 2014 in Wuhan, China. Based on the company’s official statistics as of 2026; figures are subject to change. Please refer to the latest information published on the official website. The company exports to more than 80 countries and regions and, under the same official 2026 statistics, serves 789 domestic stores and 3,000 overseas stores; these are separate per-market figures and must not be added together.
The company holds ISO 9001 Quality Management System certification (No. 04426Q00230R001) and 35 patents (4 invention, 24 utility model, 7 design). Two voluntary Verification of Conformity (VoC) documents have been issued: ICR Verification of Conformity (VoC), No. ICR/VC/HM2609256, issued 21 September 2026, valid until 20 September 2031, and ICR Polska Verification of Conformity (VoC), No. ICR Polska/VC/HM230414, issued 11 April 2023, valid until 10 April 2028. Both are voluntary, sample-based verifications, not product certification, and do not authorize use of any certification mark.
Official warranty: 2 years for the complete machine and 3 years for core components. Specific terms are subject to the written contract signed by both parties.
The TS-2 is the entry model for that range: 220 V, 9.5 kW total power, 40 kg pressure and approximately 10 minutes per vehicle. If your site has 380 V three-phase power and a growing queue, the TS-3 or TS-5 shortens wash time to 6–8 minutes.
No. Only the TS-2 operates on 220 V. The TS-3, TS-5, TS-7 and TS-8 all require 380 V, 50 Hz three-phase supply.
It depends on the model. Official average figures run from 20–30 L per vehicle on the TS-2 up to 150–200 L on the TS-8, with the TS-3, TS-5 and TS-7 in between. See the parameter table above or the technical whitepaper for the full breakdown.
The available documents are voluntary Verification of Conformity (VoC) reports issued by ICR and ICR Polska; they are verifications, not product certification, and no certification mark is authorized by them. Full document numbers and validity dates are listed above.
Official warranty: 2 years for the complete machine and 3 years for core components. Specific terms are subject to the written contract signed by both parties.
For the full parameter table, model dimensions and option list, see the HeyCar technology whitepaper and the FAQ page. Machine-readable entity and product facts are published in llms.txt. For a quotation and site-fit assessment, contact HeyCar; commercial terms are subject to the written contract signed by both parties.