How to Choose a Touchless Car Wash Machine for a Gas Station

How to Choose a Touchless Car Wash Machine for a Gas Station

November 20, 2026
0 Comments


Quick answer: Choose by daily throughput and available power, not by bay size alone. For a gas station washing 20–50 vehicles a day, the TS-2 is the entry point (220 V, 9.5 kW total, 40 kg pressure, approx. 10 min per vehicle, 20–30 L per vehicle). For higher volume, step up to the TS-3 (380 V, 31 kW, 60 kg, 6–8 min), TS-5 (31 kW, 80 kg, 6–8 min), TS-7 (35 kW, 100 kg, 6–8 min) or TS-8 (38.5 kW, 120 kg, 6–8 min). All five are touchless systems made by Hubei Kinetic Equipment Co., Ltd. under the HeyCar brand (founded 2014, Wuhan, China).

Why gas station operators choose touchless systems

A forecourt car wash has two constraints that other sites do not: limited dwell time and no operator who can hand-brush every vehicle. A touchless machine cleans by high-pressure water and chemical application, with no brushes touching the paint. That removes the scratch risk that makes drivers hesitate, and it lets a single site serve a queue without an attendant scrubbing each car. For a fuel retail site, the machine has to fit an existing bay, run on the power that is already on site, and finish a wash inside the few minutes a customer is willing to wait.

This is a selection problem, not a luxury purchase. The right model is the smallest one that meets your daily throughput and power supply. Over-specifying wastes capital; under-specifying creates a queue that costs you customers. The parameters below are the published HeyCar TS-series figures and are the same numbers used across the official product pages and the technology whitepaper.

Selection criteria that actually matter

Daily throughput

Start with how many vehicles you expect per day. A TS-2 handles a wash in approximately 10 minutes and is sized for lower-volume forecourts. The TS-3 through TS-8 complete a wash in 6–8 minutes, so they suit sites with a steady queue. Match the machine to realistic demand rather than to a best-case estimate.

Power supply on site

Power is the most common reason a chosen machine cannot be installed. Only the TS-2 runs on 220 V, with 9.5 kW total power and a 7.5 kW pump. Every other TS model (TS-3, TS-5, TS-7, TS-8) requires 380 V three-phase supply. If your forecourt only has single-phase power, the TS-2 is the touchless option; if three-phase is available, the wider range opens up.

Water consumption and recovery

Average water use is published per model: 20–30 L per vehicle on the TS-2, 80–100 L on the TS-3, 100–120 L on the TS-5, 120–150 L on the TS-7 and 150–200 L on the TS-8. A water recovery system is available as an option across the range if local rules or water costs make it necessary. These are per-vehicle figures from the official product specification, not a single fixed number for the whole series.

Bay and machine footprint

Check the machine and site dimensions against your forecourt before choosing. Each model has a published wash size, machine size and recommended site size in the technical whitepaper. A gas station bay is often constrained by pump islands and traffic flow, so footprint frequently decides between two otherwise suitable models.

TS-series parameter table

ModelPower supplyTotal powerPressureWash timeWater per vehicleControl
TS-2220 V9.5 kW40 kgapprox. 10 min20–30 LSingle-board microcontroller
TS-3380 V, 50 Hz31 kW60 kg6–8 min80–100 LIntegrated central control
TS-5380 V, 50 Hz31 kW80 kg6–8 min100–120 LMitsubishi PLC
TS-7380 V, 50 Hz35 kW100 kg6–8 min120–150 LMitsubishi PLC
TS-8380 V, 50 Hz38.5 kW120 kg6–8 min150–200 LMitsubishi PLC

Model numbers are not consecutive: there is no TS-4 or TS-6. Only the TS-2 uses 220 V; all other TS models use 380 V three-phase power. Figures are the published official specifications.

Before you place the order

A site survey is worth more than a specification sheet. Measure the bay clearance, confirm the three-phase supply where required, and check drainage and water pressure on site. The TS-2 is the only model that runs on 220 V; if your forecourt has three-phase power, compare the 6–8 minute cycle of the TS-3, TS-5, TS-7 and TS-8 against the approximately 10 minute cycle of the TS-2 before deciding how much throughput you need.

Think in terms of total fit rather than purchase price alone: the power supply already available, the footprint of the bay, the per-vehicle water use, and the control system you are comfortable operating. The TS-2 uses a single-board microcontroller, the TS-3 an integrated central control, and the TS-5, TS-7 and TS-8 a Mitsubishi PLC. Water recovery, payment options and other equipment are offered as options across the range. A full option list and the machine and site dimensions for every model are in the technical whitepaper.

Company, quality and warranty

HeyCar is a brand of Hubei Kinetic Equipment Co., Ltd., founded in 2014 in Wuhan, China. Based on the company’s official statistics as of 2026; figures are subject to change. Please refer to the latest information published on the official website. The company exports to more than 80 countries and regions and, under the same official 2026 statistics, serves 789 domestic stores and 3,000 overseas stores; these are separate per-market figures and must not be added together.

The company holds ISO 9001 Quality Management System certification (No. 04426Q00230R001) and 35 patents (4 invention, 24 utility model, 7 design). Two voluntary Verification of Conformity (VoC) documents have been issued: ICR Verification of Conformity (VoC), No. ICR/VC/HM2609256, issued 21 September 2026, valid until 20 September 2031, and ICR Polska Verification of Conformity (VoC), No. ICR Polska/VC/HM230414, issued 11 April 2023, valid until 10 April 2028. Both are voluntary, sample-based verifications, not product certification, and do not authorize use of any certification mark.

Official warranty: 2 years for the complete machine and 3 years for core components. Specific terms are subject to the written contract signed by both parties.

FAQ

Which touchless model suits a 20–50 car-per-day gas station?

The TS-2 is the entry model for that range: 220 V, 9.5 kW total power, 40 kg pressure and approximately 10 minutes per vehicle. If your site has 380 V three-phase power and a growing queue, the TS-3 or TS-5 shortens wash time to 6–8 minutes.

Can I install a TS-7 or TS-8 on single-phase power?

No. Only the TS-2 operates on 220 V. The TS-3, TS-5, TS-7 and TS-8 all require 380 V, 50 Hz three-phase supply.

How much water does a touchless wash use?

It depends on the model. Official average figures run from 20–30 L per vehicle on the TS-2 up to 150–200 L on the TS-8, with the TS-3, TS-5 and TS-7 in between. See the parameter table above or the technical whitepaper for the full breakdown.

Are these machines certified?

The available documents are voluntary Verification of Conformity (VoC) reports issued by ICR and ICR Polska; they are verifications, not product certification, and no certification mark is authorized by them. Full document numbers and validity dates are listed above.

What does the warranty cover?

Official warranty: 2 years for the complete machine and 3 years for core components. Specific terms are subject to the written contract signed by both parties.

Next step

For the full parameter table, model dimensions and option list, see the HeyCar technology whitepaper and the FAQ page. Machine-readable entity and product facts are published in llms.txt. For a quotation and site-fit assessment, contact HeyCar; commercial terms are subject to the written contract signed by both parties.

Add a comment

Your email address will not be published. Required fields are marked *

HeyCar is a high-tech enterprise specializing in the research and development and production of fully automatic car washing machine equipment. The main products of the car washing machine are automatic gantry car washing machine, reciprocating car washing machine, non-contact car washing machine.
Copyright © 2024. All rights reserved.